Flexible PCBS

Foil PCBs are made of Pyralux - thickness 0.1 mm, one or both sides plated with copper 18 or 35 µm.

• Hole metallizing impossible
• Bending radius of 5 mm and repeated bending by 180 ° are allowed
• Total board size is limited to 200 x 300 mm due to the complicated production technology.
• The boards must be soldered carefully as the tracks could separate from the carrier.

Flexible PCBs are made of FR4 - thickness 0.1 mm.

• Hole metallizing is possible
• The material is more solid than Pyralux
• Repeated bending up to 90o with the radius of 50 mm is allowed
• Solder mask can be applied

Maximum size:

• 380 x 500mm with galvanic tin
• 380 x 500mm with OSP
• 380 x 500mm with galvanic gold

Needed documents:

• GERBER data with check prints or
• positive films of tracks, solder masks and service print. Set of data files allways required for production purposes.
• EXCELLON drill data
• Final board size, eventual milling drawing. The final dimensions are finished only by milling. Other wishes have to be consulted during placing the order.
• HAL is not applicable.